- Radio shack pro 106 update#
- Radio shack pro 106 upgrade#
- Radio shack pro 106 software#
- Radio shack pro 106 code#
But, for example, if an update only affects edacs systems, and you do not scan any edacs systems i'd suggest just staying where you are. If the change is something you definitely need, then an update could be a benefit. What i recommend is to look at the version you have now, and look at the stated changes for the new version. If so, you could be trading one set of bugs for another set. Some people feel that every program out there has bugs. I do not just automatically update software, operating systems, firmware or any type of code. When that happens, you'll have to send the device back to the manufacturer to be brought back to life. For example, if power is lost to the device while you are performing an update, usually it turns the device into a "brick".
It is a delicate process to update firmware.
Radio shack pro 106 software#
While many people treat firmware updates like software updates, i don't. Although as technology progresses, these lines are becoming more blurred. We refer to the software in device as firmware because it typically resides in an ic, rather than on a disc.
Radio shack pro 106 code#
We refer to code that runs our pcs (other than bios) as software because it resides on a disc and is "loaded" when we boot up our pcs. Software is the code that can be easily changed. Hardware is the physical components that make up a device. Note that because the PRO-106 is Radio Shack brand, you'll need to get the update from Radio Shack. You can determine what was changed in the updated firmware by going here or here. To determine the versions of code you are presently running turn off the scanner, press and hold PGM while powering the scanner on, then release PGM.
The DSP performs specific tasks (such as digital decoding). The boot loader is the code which will perform the physical programming of the ICs with new (o/s or DSP) firmware. The firmware in the PRO-106/etc is divided into three portions a boot loader, the o/s firmware and the DSP (Digital Signal Processor) code. Some places sell a lot of scanners and are always getting shipments of new models but that still does not mean your specific unit was not sitting on the shelf for months. But, for example, if an update only affects EDACS systems, and you do not scan any EDACS systems I'd suggest just staying where you are.Įven though you bought your scanner recently, it has little to do with what version of firmware it is running. What I recommend is to look at the version you have now, and look at the stated changes for the new version. Some people feel that EVERY program out there has bugs. While many people treat firmware updates like software updates, I don't. We refer to the software in device as firmware because it typically resides in an IC, rather than on a disc. We refer to code that runs our PCs (other than BIOS) as software because it resides on a disc and is "loaded" when we boot up our PCs. Ĭlick to expand.Hardware is the physical components that make up a device.
Radio shack pro 106 upgrade#
This link discusses the most recent update for your scanner and may help you decide if you want (or even need) to upgrade it. This isn't updated quite as often, but may improve how the scanner handles various digital audio decoding (some may also do some analog processing as well). Second there's the software that controls the DSP (basically the "Digital Sound Processor", although it goes by several names depending on if you talk to an engineer or marketing person). It does things like defining how your scanner operates, what button does what, what is shown where on the screen, how external software interfaces with it, and pretty much everything that your scanner does (except how the DSP itself operates). Please note that the discussion below may not be 100% technically accurate, but should help explain what they are in rather simple terms that most folks may understand.įirst there's the firmware that is basically the OS for your scanner and is often called the "CPU Firmware". Actually there are generally two different areas of software a scanner runs (not counting the software YOU may use to program your scanner). Firmware is basically the software that runs your scanner.
0 kommentar(er)
